Cecil County, MD Skilled Waterproofing & Foundation Repair Experts

A homeowner in Elkton, MD was concerned about their basement flooding. Thanks to our team and our quality waterproofing products, we were able to eliminate both the water in the basement and the homeowner’s concerns for good. We installed our SuperSump sump pump which pumps up to 2,280 gallons an hour and stops water from reentering the basement. WaterGuard will direct any water leaking through the walls and floor into the sump pump before it has the chance to do any damage. In case of pump failure, our reliable Ultrasump system also removes massive amounts of water while maintaining battery power and serving as a backup pump. The homeowner couldn’t be happier to have a guaranteed dry basement.

To ensure a homeowner would have a safe and dry basement, we began our spot mold treatment to rid the customer’s home of all mold. We installed the reliable SuperSump sump pump and WaterGuard XL system to prevent water from entering the basement. The quality SaniDry dehumidifier was added to control the humidity and therefore decrease the risk of water and mold as well as the IceGuard system which is a backup sump pump in case of freezing pipes. Now, the homeowner has a basement that is guaranteed to stay dry with these products.

 The customer had a problem with water coming into his basement from the steps.  Water was actually coming up from the floor at the base of the bottom step.  They also had water coming from the base of the foundation walls and the walls were very damp.  

We installed a TrenchDrain in front of the step to capture water coming down the steps but also to relieve hydrostatic pressure from below.  Then we installed the WaterGuard system, which we connected to our SuperSump system.  To finish the job properly, we installed a vapor barrier over the walls to prevent moisture from entering the basement.  

This old house had a brick floor. We cut the brick and installed a WaterGuard waterproofing system with SuperSump.  SuperSump pumps are equipped with an airtight cover and WaterWatch alarm system in case of pump or power failure. This basement is now dry and ready for use.   

This homeowner explained the ongoing water seepage issues within the basement. Water would often come in where the floor and walls meet. Our team installed our WaterGuard drainage system along the perimeter as well as our CleanSpace wall system on the walls.

This customer had an old french drain system in his basement. However, water would seep up through the floor when it rains. The carpet in the basement had to be removed due to excessive water intrusion, ruining the carpet. To solve these issues, our team installed our WaterGuard drainage system along the perimeter of the basement. This system was tied into the existing sump pump system in the basement.

When heavy rains in Elkton, MD, started trickling into where the wall meets the floor of a homeowner's finished basement, they knew they needed a solution fast. Water in the basement wasn’t just a nuisance; it was a threat to their home's structure and their well-being. We found exactly where and how water was making its unwelcome entry. Armed with this understanding, we recommended a reliable solution: WaterGuard. Our installation day was all about efficiency and care. Our foreman and capable installers arrived with everything needed to tackle the job. WaterGuard, our go-to for cases like these, was skillfully installed around the perimeter of the basement. The system is ingeniously designed to intercept and redirect water away before it even stands a chance to seep onto the basement floor. 

Not long ago, a homeowner in Elkton, MD reached out to us at Basement Systems USA with a relatable yet troubling issue. Every time it rained, they faced the dreaded issue of water seeping into their beautifully finished basement. The situation had become so recurrent that the last rainfall forced them to pull up their carpet to prevent the onset of mold. Our recommended remedy for their woes was the installation of our WaterGuard system coupled with the highly efficient SuperSump pump. WaterGuard is an exceptional interior drainage system designed to sit at the perimeter of the basement floor, catching any water trying to seep in, while the SuperSump entirely sites the collected water out and away from the home.

Recently, in Elkton, MD, we at Basement Systems USA were called in by a homeowner struggling with a frustrating problem. Despite having a beautifully finished basement, every time it rained, they encountered water leakage in their unfinished utility area. This leakage wasn't just a nuisance; it threatened to damage their home and reduce its comfort and value. Understanding their concerns, we stepped in to assess the situation fully. After a detailed home inspection by one of our System Design Specialists, it was clear the solution lay in tackling the root of the water intrusion. Our recommendation was one of our trusty systems, the SuperSump, known for its reliability and efficiency in keeping basements dry and safe. Installing the SuperSump required professionalism and precision, strengths that our production team – comprising skilled foremen and installers – displayed in abundance. They made sure the installation process was thorough yet unobtrusive, ensuring minimal disruption to the homeowner's daily life. The outcome was a resounding success. The next time it rained, the utility area remained completely dry, much to the homeowner's relief and satisfaction. This project not only solved the immediate issue but also protected the basement from potential future water damage. For us at Basement Systems USA, it was another opportunity to deliver a remarkable customer experience, demonstrating our commitment to providing reliable and long-lasting solutions for our clients' homes.

When a homeowner in Elk Mills, MD noticed water puddles near their home's entryway, and water seepage through the back wall during rain, they knew it was time to call for professional help. Our process kicked off with our trusted Customer Care team, who quickly set an appointment that fit the homeowner's schedule. A System Design Specialist from our sales team was dispatched to the premises for a thorough inspection. They diagnosed the core issues causing the water intrusion, taking time to explain our findings and answering any questions the homeowner had. It was clear that a tailored approach was necessary for this unique mix of materials in the home's construction. We recommended a comprehensive water management solution that included our best-in-line waterproofing products to address both their immediate puddling and seepage problems, and also guard against future water-related issues. Our production team, a group of experienced foremen and installers, moved in to expertly install the designated products. Throughout the project, precision and cleanliness were our top priorities, making sure we left the home better than we found it.

Recently, our team at Basement Systems USA had the opportunity to assist a homeowner in Elk Mills, MD, who was facing a pressing challenge with their basement. The issue was straightforward but distressing: every time it rained, water leaked through a crack in the block foundation of their unfinished basement. Understandably, the homeowner wanted to solve this problem promptly to protect their home and potentially finish their basement in the future. Upon contacting us, our Customer Care team quickly scheduled a home inspection to assess the situation. Our System Design Specialist visited the home, carried out a thorough inspection, and identified the best approach to address the issue. The recommendation was to install our WaterGuard system, a reliable solution designed to redirect water away from the basement, preventing future leaks and water damage.

In Elk Mills, MD, a homeowner reached out to us grappling with a persistent issue every time heavy rains or snow melted – water sneaking its way into their unfinished basement where the wall meets the floor. Our System Design Specialist thoroughly inspected the area, confirming the homeowner's suspicions and suggesting a comprehensive approach. The prescription included our esteemed WaterGuard system to cleverly reroute incoming water, the SaniDry Sedona to keep humidity levels in check, and the CleanSpace wall system adding an extra layer of moisture protection while our SuperSump pump tirelessly kicked out the intruding water. Our production team, skilled and ready, turned the plan into reality. With meticulous care, they installed the specified system, marrying innovation with precision. Diving in, the WaterGuard was strategically placed along the basement's perimeter, ready to catch any sneaky water.

Recently, we had a homeowner from North East, MD, reach out to us with a pressing issue — a disturbing growth of mold along their basement walls attributed to persistent moisture. Understandably worried, they noted that the "drainage" around the three sides of the basement was effectively just raw dirt, exacerbating the humid conditions that mold thrives in. An unfinished space, it was crucial for the homeowner to find not just any fix, but a sustainable solution to reclaim and protect this part of their home. Our approach at Basement Systems USA begins with truly understanding the problem at hand, which is why we kicked things off with a detailed home inspection. Conducted by a skilled System Design Specialist from our sales team, this process enabled us to identify the root causes of the moisture and mold issues effectively. Following the inspection, our recommended strategy involved the installation of our top-notch products: WaterGuard, an interior drainage system designed to capture wall and floor seepage before it reaches your basement floor, and TripleSafe Sump Pump, our reliable, three-pump system designed to handle high volumes of water and provide back-up protection. Our production team, composed of dedicated installers led by an experienced foreman, executed the installation efficiently.

Over in North East, MD, we had the opportunity to turn around a situation for a homeowner struggling with a persistent problem. His unfinished basement, was equipped with a sump pump and French drain, was failing to keep water at bay during heavy rainfalls; water still trickled in through cracks in the wall, and he suspected his French drain was clogged. Understanding the frustration of an unpredictable basement foundation, we were on a mission to provide him with a remarkable customer experience and a lasting solution. Our System Design Specialist provided the homeowner an efficient solution: the installation of WaterGuard. The WaterGuard system, designed to capture wall and floor junction leaks, channels water straight to the sump pump – preventing it from ever troubling the basement space again. Putting our plan into action, our production team, comprising a foreman and several skilled installers, got down to work.

During a particularly rainy week in Elkton, MD, a homeowner reached out to us at Basement Systems USA with a troubling issue. They had noticed a troubling sign of water damage: the carpet below a basement window was suddenly sopping wet. Upon closer inspection, they discovered an exterior crack below the window, signaling that water was finding its way into their finished basement. Concerned about potential long-lasting damage and the implications for their comfortable living space, they knew it was time for professional intervention. As soon as they contacted us, we sprung into action. Upon visiting the home, our specialist conducted a thorough examination, tracing the root of the problem to the exterior crack. The proposed solution? FlexiSpan, a reliable system renowned for its capability to provide a durable, long-term fix for such leakage problems.

Recently, we had the privilege of assisting a homeowner in Elkton, MD, who was facing a peculiar challenge. Their partially finished basement, a cozy retreat for family gatherings, was being compromised due to water leakage in the unfinished section during heavier rainfalls. Concerned about potential damage and the implications for their home’s overall integrity, they reached out to Basement Systems USA for help. Our skilled System Design Specialist visited their home, thoroughly inspecting the affected area to diagnose the underlying issue. The recommended solution was the installation of our WaterGuard interior drainage system and SuperSump sump pump system – a combination proven to offer an effective and lasting resolution to such water concerns. Once the homeowner agreed, our proficient production team took the helm. They carefully installed WaterGuard along the basement’s perimeter to expertly channel incoming water. Coupled with the SuperSump, designed to efficiently evacuate the collected water away from the home, we ensured a comprehensive system was in place to keep the basement dry, without compromising the finished area's appeal.

Recently, we had the opportunity to assist a homeowner in Elkton, MD, who was battling with a frustrating situation. For the last couple of months, with almost every rainstorm, they found water leaking into their basement. To make matters worse, the cellar, which is a separate space from the basement, was also getting wet. Our System Design Specialist then visited the home to thoroughly inspect the issue. By diagnosing the problem accurately, they could recommend a specialized solution tailored to address the homeowner's water troubles directly. The solution? Installing a combination of our tried and trusted products; the WaterGuard and the TripleSafe Sump Pump system. The WaterGuard is designed to intercept water at the basement perimeter and channel it away before it causes damage. The TripleSafe Sump Pump, on the other hand, is a reliable pump system that offers protection from water accumulation in the basement, ensuring peace of mind during even the heaviest of storms. 

Not long ago, a Rising Sun, MD homeowner preparing to put their duplex on the market faced a pressing issue – their basement was succumbing to the relentless onslaught of water with every recent storm. Our System Design Specialist soon visited the home, keenly inspecting the water-logged basement to understand the depth of the problem fully. Identifying the root cause of the water intrusion, they proposed a solution that would not only address the immediate issue but ensure long-lasting dryness and peace of mind for any future owners: CleanSpace. CleanSpace is an innovative vapor barrier system specifically designed to transform wet, damp crawl spaces into dry, usable spaces. Its tough, durable material effectively seals off water from the earth, preventing it from making unwanted entrances into the home. 

Recently, we were called to a beautiful home in Elkton, MD, where the homeowner was facing an all-too-common challenge. Despite having a finished basement that served as a cozy living space, they encountered a problem: water was leaking in through the Bilco door area during heavy rain. Unsure if the issue was with the drain or something else, they reached out to us for help. Upon arrival, our System Design Specialist carried out a thorough inspection to understand the root of the problem. It became clear that the drainage system was overwhelmed, allowing water to seep in at the main door. We knew right away that our WaterGuard interior drainage system and SuperSump sump pump were the perfect solutions to address and prevent future leaks. After the homeowner agreed to our proposed solution, our talented production team swiftly got to work. They installed the WaterGuard along the basement's perimeter to efficiently capture wall and floor seam water leaking, directing it away from the living space. Then, they set up the SuperSump sump pump system, designed to efficiently pump away any collected water, significantly reducing the chances of it entering the basement area. 

When a homeowner in Elkton, MD, started noticing signs of water intrusion in their basement—mud trails and water stains creeping along the floor near the back wall—it was clear that something more formidable than a simple cleanup job was required. With concerns piling up, they reached out to us at Basement Systems USA for a reliable fix to their soggy predicament. Our team kicked off the process with a thorough inspection directed by one of our experienced System Design Specialists. The mission was clear: pinpoint the underlying issues and roll out an effective, durable solution. What we found was an overwhelmed drainage system cowering under the invasion of mud, essentially turning it obsolete. The diagnostic phase revealed the pathway forward with an urgent need for an overhaul. We introduced the homeowner to two of our cutting-edge products: the WaterGuard and SuperSump systems. WaterGuard, a genius of a perimeter drainage system, was installed strategically alongside the internal confines of the basement floor, a move meant to intercept water at its entry point and redirect it away with stealth and efficiency. Complementing this, the SuperSump sump pump setup, a powerhouse in water evacuation, was installed to ensure that any water captured by the WaterGuard system was efficiently pumped out and away from the home, prohibiting any backwash.

Recently, we had the privilege of helping a homeowner in Elkton, MD, who had been facing some troublesome water leakage in their basement. They had only been in their home for a year when they noticed that their sump pump was constantly running to keep up with the water, especially problematic since their basement was mostly finished, which could lead to extensive damage without the right solution in place. The areas where the walls were exposed revealed water seeping in, a sight no homeowner ever wants to see. Understanding the urgency of the situation, the homeowner reached out to us, Basement Systems USA. Our System Design Specialist personally visited their home, conducted a thorough inspection, and really took the time to diagnose the water intrusion issue. After considering all factors, the specialist recommended installing our WaterGuard system, designed specifically for basement waterproofing by discreetly directing the water out and away from the basement. Without delay, our skilled production team was on-site, consisting of a foreman and highly trained installers, who professionally handled the installation job.

Recently, we had the privilege of helping homeowners in North East, MD, who were battling water leakage in their basement, especially around the Bilco door every time it rained. The persistent leaks not only posed a threat to their property's integrity but also their peace of mind. Fortunately, they reached out to us at Basement Systems USA, and our journey to restore their home's safety and comfort began. Our System Design Specialist conducted a thorough evaluation, diagnosing the root cause of the water intrusion. Without delay, we recommended an efficient and durable solution – installing WaterGuard, our proven interior drainage system designed specifically to capture water seeping into basements. Our installation process was seamless. 

This homeowner's basement featured an unfinished block wall, which might sound typical enough until you notice a menacing horizontal crack running across it. Cracks in basement walls aren't just eyesores; they're open invitations to water damage and structural instability. Our System Design Specialist visited the home, meticulously inspected the basement's condition, and confirmed our initial suspicion. The crack posed a real threat to the basement's integrity and waterproofing standing. After thoroughly diagnosing the problem, our specialist proposed a lasting solution that would not only address the immediate issue but also ensure the basement's preparation against future waterproofing challenges. Our recommendation? Installation of our renowned WaterGuard system coupled with the robust SuperSump pump. The WaterGuard system is ingeniously designed to intercept water at the perimeter of the basement, channeling it efficiently to the SuperSump pump. This pump system, recognized for its reliability, then safely expels the water away from the home, ensuring the basement remains dry and protected. 

In Elkton, MD, a homeowner reached out to us at Basement Systems USA, looking to solve their leaky basement. Water Leakage, especially during storms, was fast becoming the unwelcome norm. A System Design Specialist from our savvy Sales Team inspected the basement, diagnosing the leakage source with expertise. The recommended solution? The efficient pairing of our WaterGuard system and the TripleSafe Sump Pump. This duo is unparalleled in keeping basements dry, offering homeowners like ours in Elkton a much-needed sigh of relief. 

Recently at Basement Systems USA, we had the opportunity to work on an older home in Colora, MD. The homeowner reached out to us concerned about how the basement suffered from unwanted water intrusion during heavier rainstorms. Our System Design Specialist diagnosed the problem and recommended an effective solution to secure the basement's future against water damage - a tried and truly reliable duo: Our WaterGuard interior drainage system and the TripleSafe Sump Pump. Installing the WaterGuard system involved strategically placing it along the periphery of the basement to intercept water at the most likely entry points. The water is then efficiently redirected to the TripleSafe Sump Pump.

We recently had the pleasure of helping a homeowner in Cecilton, MD, who was confronting persistent moisture issues in their crawl space. Recognizing the need for professional intervention, they reached out to us at Basement Systems USA, hoping for a reliable and lasting solution. Our System Design Specialist thoroughly evaluated the situation and diagnosed the underlying causes of the moisture problem. Based on these findings, we recommended a combination of our acclaimed CleanSpace and SilverGlo products as the best course of action to tackle their specific concerns. CleanSpace is a durable, bright white crawl space liner that dramatically transforms damp, musty areas into clean, dry spaces. Meanwhile, SilverGlo panels are designed to insulate the crawl space walls, offering an energy-efficient upgrade to help maintain a consistent temperature and further prevent moisture intrusion.

Recently, a homeowner in Cecilton, MD, reached out to us with a problem many in the region face – a compromised crawlspace. Our System Design Specialist conducted a thorough inspection of their crawl space. Knowing full well the importance of not just a quick fix but a long-term solution, we recommended installing SmartJack supports. SmartJack is not your everyday band-aid solution. This is a strong, corrosion-resistant, and adjustable system designed to stabilize and level the crawlspace beams, bringing peace of mind to any homeowner. 

In Cecilton, MD, a homeowner had a big problem lurking beneath their house. Their crawl space had turned into a hot spot for mold. Our Customer Care team quickly set up an appointment, a System Design Specialist began inspecting under their house. The prescription included CleanSpace, a robust liner that rebels against moisture, sprouting an all-access, no-entry zone to mold. SilverGlo insulation joined the crew, adding armor to the walls and making sure the energy vibe was contained and efficient within the home. To knock out the humidity, we introduced SaniDry Sedona – a top-grade, compact yet tremendously powerful dehumidifier that keeps the air dry and healthy. 

Recently in Rising Sun, MD, a homeowner noticed their crawl space was needing some attention, particularly with insulation concerns and possible issues with a beam or support structure showing signs of rot. Our System Design Specialist paid the homeowner a visit, inspecting the crawl space thoroughly to understand the full scope of the work needed. It was decided, based on our expertise and the homeowner's openness to suggestions, to install SilverGlo along with assessing and stabilizing the potentially compromised beam. SilverGlo, as a standout solution in our offerings, is designed explicitly for thermal insulation, ensuring that warmth stays in during the winter and the crawl space remains cool during the summer, all while minimizing energy costs. 

With an unfinished basement that had been safeguarded with Drylock, everything seemed in order until heavy rains introduced unwanted leaks, concentrating their unfriendly visits to a troublesome corner near the oil tank. We ensued a thorough inspection by one of our knowledgeable System Design Specialists, who diagnosed the issue and prescribed a remedy featuring our tried-and-true products: WaterGuard and SuperSump. 

When a homeowner in North East, MD, found themselves facing a damp and moldy crawlspace with a dirt floor, they knew they had to act fast. Our System Design Specialist visited the home, armed with the knowledge and tools necessary to diagnose the problem accurately. After a careful examination, it was clear that crawl space encapsulation with CleanSpace and insulation enhancement using SilverGlo was the way forward. 

When a homeowner in North East, MD, began noticing their carpets and belongings getting damaged due to unwelcome water in their crawl space, especially after recent rainstorms, they turned to us at Basement Systems USA for help. Our specialist conducted a thorough inspection to diagnose the problem areas accurately. It was identified that the existing water management system couldn’t cope with the volume of water during heavy rainfall, causing the unwanted water issues in their crawl space. To tackle this, we proposed installing a combination of our proven products: WaterGuard, a reliable interior drainage system; SuperSump, a top-notch sump pump; and TripleSafe Sump Pump, offering triple the protection against water. 

When a homeowner in Elkton, MD, contacted us at Basement Systems USA with concerns about her waterlogged basement, especially with run-off water leaking into her garage located below her house, we knew we needed to provide a solution that not only addressed the immediate water intrusion but also averted future issues. After a thorough inspection to understand the extent of the water damage and identify the key causes, we recommended installing our WaterGuard drainage system alongside the TripleSafe Sump Pump system. 

This basement, which came equipped with a sump pump and French drain, seemed inadequately protected against water damage. The suspicion was that the discharge line was not optimally located, which can spell disaster for any basement by severely limiting the effectiveness of water management systems. Our seasoned System Design Specialist visited the home, meticulously inspecting the basement's condition and its existing water mitigation setup. It became clear that the homeowners were spot-on: the sump pump's discharge line was indeed in need of rerouting to ensure water was being diverted away from the house efficiently. With a plan in action, our specially trained production team got down to work, installing a high-efficiency TripleSafe Sump Pump alongside an exceptional WaterGuard interior drainage system.  sets

We recently had the opportunity to assist a homeowner in Chesapeake City, MD, who was dealing with an all-too-common issue in homes around the area—a leaky and inefficient crawlspace. This home had a unique setup: a two-part crawlspace, one side featuring a fully stand-up area with a concrete floor, the other not as tall and covered with nothing but a thin layer of plastic. The homeowner wanted to encapsulate the smaller area to protect their home and improve their living environment. Our System Design Specialist, equipped with the expertise to diagnose and recommend personalized solutions, identified the perfect approach for turning their damp, musty crawlspace into a clean, dry space once and for all. We chose to install our proven system that consisted of CleanSpace, SuperSump, and WaterGuard. The CleanSpace liner was meticulously cut and installed to completely seal off the crawlspace floor and walls from earth moisture and pests. Our SuperSump sump pump system was then placed to efficiently pump out any intruding water, ensuring that the area remains dry. Finally, WaterGuard was incorporated as an added defense, intercepting water that seeps through the walls and redirects it to the sump pump, away from the crawlspace. 

When a homeowner in Rising Sun, MD, reached out to us, they were grappling with a persistent issue that's all too common in our line of work – water intrusion in their basement and garage, leading to flooding every time a storm rolled through. A System Design Specialist from the Sales Team then went onsite to diagnose the underlying issue. It was clear that the basement and garage needed robust waterproofing to halt the flooding. Our solution? The installation of our WaterGuard drainage system coupled with the robust SuperSump sump pump. This pairing is crucial; while WaterGuard effectively captures wall and floor seepage before it reaches the basement or garage space, the SuperSump efficiently pumps this collected water away from the house, preventing flooding and safeguarding the integrity of the home's foundation. 

Recently, we at Basement Systems USA had the pleasure of assisting a homeowner in Earleville, MD, who was facing a constant battle with their sump pump. Having lived in their home for around six years, the homeowner noticed that the sump pump was always running—a problem that became a concern. A neighbor hinted that a creek running under the area might be contributing to the issue. Eager for a lasting solution, the homeowner reached out to us. After the homeowner contacted our Customer Care team, we scheduled a thorough inspection of the property. Our System Design Specialist visited the home, assessed the unique situation, and discovered that indeed, the excessive water was putting non-stop demand on the existing sump pump system. To address this, we recommended installing our TripleSafe Sump Pump system. Renowned for its reliability and efficiency, the TripleSafe Sump Pump would ensure the homeowner's basement remained dry, handling any volume of incoming water without breaking a sweat.