Basement Waterproofing Before & After Photos

Click on a photo to enlarge.

Humidity Control in Glen Arm MD

This was a partially finished basement that in the warmer months, would become very humid. Humidity can lead to condensation which can lead to mold. We came out and installed our SaniDry Upright XP Dehumidifier. This dehumidifier eliminates damp, musty odors by drying and filtering the air, all while being tucked away in the corner or closet of your basement.

Parkton, MD Basement Waterproofing System with TripleSafe Sump & Thermal Wall Vapor Barrier

This project in Parkton, MD included a Triple Safe sump pump with battery Back-up, WaterGuard drainage system, and Thermal wall vapor barrier.

Sump Pump Installation in Middle River, MD

A home in Middle River, MD was experiencing water seepage coming out of a few cracks in the basement wall. The basement had an existing sump pump but the water was still making its way on the floor. The previous system was not working as it should have so we provided a permanent solution. A SuperSump Pump System was installed by our foreman, Bernie. This system will effectively pump water out of the basement, keeping it dry and healthy all year long. Thanks to our System Design Specialist Jeff, the homeowner's peace of mind was restored. 

Baldwin MD Basement Waterproofing

This Baldwin customer reached out to Basement Systems USA in need of basement waterproofing. The customer had multiple locations in the basement, where water would come through the block foundation whenever it rained. We sent our experienced inspector, Jeff Yentzer, out to the property to assess and come up with the best solution for correcting the water intrusion. The solution Jeff came up with was to install Waterguard and a CleanSpace along the problematic wall. The CleanSpace will direct any water intruding through the foundation, down to the Waterguard which will then direct the water over to our SuperSump Pump that we installed as well and will be pumped out of the basement and away from the house. We also installed a SaniDry XP that will keep humidity low and will tie into the sump pump, so not only will the SuperSump pump out the intruding water from the block walls, but will also dump out any moisture collected from the dehumidifier.

Wall repair in White Marsh, MD

This customer had a crack in his basement wall. When it rained his sump pump wasn't efficient so, the leak created mold along the base board. We did a mold treatment with Mold X 2, fixed the crack with FlexiSpan. We installed some WaterGuard and a SUPERSUMP M63 replacing his old inefficient system.

our service area

We serve the following areas

MarylandPennsylvania Our Locations:

Basement Systems USA
2092 East Old Philadelphia Road
Elkton, MD 21921
1-410-858-4610


Basement Systems USA
3000 Woods End Dr
Joppa, MD 21085
1-410-656-2558